Please help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
The audio and projector settings, document cameras, and cameras where installed are controlled by a Crestron touch panel on or near the instructor's desk. If you are experiencing issues with the audio, projection, or control panel, please get in touch with the Technology Service Center by calling (443) 518-4444 ext. 3 three or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...
2. Check the volume on the computer and the video presented. In the Crestron Touch Screen, press Volume Up to increase the volume and Volume Down to decrease the volume. To mute the speakers, press Volume Mute.
Document Camera
Document cameras are installed at the instructor station in most SET classrooms. The instructions below cover using the document camera to display content on the projection system. If you have any issues with the document camera or would like to request one for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
Using the document camera
- Power on the The document camera using the power button on the front of the devicefor this classroom is mounted in the ceiling above the left side of the instructor desk.
- On the Crestron touch panel, select the document camera input option.
- Select which device or devices you would like to display your content on.
- Touch 'Go' to display content from the document camera on your selected devices.
...
Laptop Cart
If you are an instructor and would like to request access to a laptop cart, please use the following link: https://forms.office.com/r/jxwnQhWHGf
Unlocking the Laptop Cart
1. Input the combination. As shown, numbers must line up in the middle of the lock (highlighted in red).
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from the handle. Twist the handle clockwise.
Rooms with laptop carts in SET:
...
Room
...
Number of Laptops
...
SET109
...
30
...
SET160
...
24
...
SET160 (iPads)
...
25
...
SET163
...
20
...
SET203
...
30
...
SET209
...
25
...
SET250
...
24
...
SET252
...
24
...
SET303
...
30
...
SET350
...
24
...
SET352
...
24
...
SET353
...
24
...
SET360
...
24
...
SET362
...
24
...
SET364
...
24
...
SET380
...
24
...
SET382
...
24
...
SET401
...
25
...
SET403
...
25
...
SET460
...
24
...
SET462
...
24
...
SET463
...
24
...
SET480
...
6
...
SET501
...
8
Presentation Remote
Most SET classrooms are equipped with Kensington presentation remotes for PowerPoint presentations. The remote can navigate through PowerPoint presentation slides, control the computer mouse, and has a built-in laser pointer.
...
If you are experiencing issues with a classroom presentation remote or would like to request a remote for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request.
...
Wireless lavaliere microphones are installed in most SET classrooms. If you are experiencing issues with a wireless microphone or would like to request one for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request.
...
- If the microphone is on, but you cannot hear your voice projected over the room speakers, please check the mute switch on the top of the unit to ensure the device is not muted.
Webcam
Webcams are available in the rooms listed below. Webcams can be used for virtual meetings in software such as Zoom and Canvas. If you would like to request a webcam for your classroom, please contact the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request.
...
Room
...
SET101
...
SET109
...
SET410
...
Connect Your Device
You can connect your laptop or tablet using the HDMI or VGA cord provided at the instructor station. Once you have connected your device, select either the VGA or HDMI source option on the Crestron touch panel. If you need an adapter or are unsure if you can connect your device, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...