Help Please help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
- Instructor Computer
- AV Control System (Crestron)
- Document Camera
- Laptop Cart
- Presentation Remote
- Wireless Microphone
- Webcam
- Connect Your Own Device
Instructor Computer
...
The audio and projector settings, document cameras, and cameras where installed are controlled by a Crestron touch panel on or near the instructor's desk. If you are experiencing issues with the audio, projection, or control panel, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...
1. Press Room Speakers to play sound from a selected source.
2. Check the volume in on the computer and the video presented. In the Crestron Touch Screen, press Volume Up to increase the volume , and Volume Down Down to decrease the volume. To mute the speakers, press Volume Mute.
Document Camera
The instructions below cover using the document camera to display content on the projection system. If you have any issues with the document camera or would like to request a document camera one for your classroom, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, three or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...
1. Press the document camera button on the Crestron Touch Screen.
2. Press the desired projector.
3. Press Go.
Laptop Cart
If you are an instructor and would like to request access to a laptop cart, please use the following link: https://forms.office.com/r/jxwnQhWHGf
Unlocking the Laptop Cart
1. Input the combination. Numbers As shown, numbers must line up in the middle of the lock (highlighted in red) as shown.
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from the handle, . Twist the handle clockwise.
Presentation Remote
Classroom Classrooms are equipped with Kensington presentation remotes to be used with PowerPoint presentations. The remote can navigate through PowerPoint presentation slides, control the computer mouse, and has a built-in laser pointer.
The presentation remote can be powered on using the switch on the left side. When the remote is on, the buttons should light up slightly.
If you are experiencing issues with a classroom presentation remote or would like to request a remote for your classroom, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, three or by using this link to create a service request.
Connect Your
...
Device
You can connect your laptop or tablet using the HDMI or VGA cord provided at the instructor station. Once you have connected your device, select either the VGA or HDMI source option on the Crestron touch panel. If you need an adapter or are not sure unsure if you can connect your device, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, three or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
