Help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
USB ports are located on the front of the instructor computer and on the left side of the instructor station monitor.
Classroom
AV Control System (Crestron)
...
2. Check the volume in the computer and the video presented. In the Crestron Touch Screen, press Volume Up to increase the volume, and Volume Down to decrease the volume. To mute the speakers press Volume Mute.
Document Camera
The instructions below cover using the document camera to display content on the projection system. If you have any issues with the document camera or would like to request a document camera for your classroom please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
Displaying Content on the Projectors or other room displays
- Power on the document camera using the power button on the front of the device.
- On the Crestron touch panel, select the document camera input option.
- Select which device or devices you would like to display your content on.
- Touch 'Go' to display content from the document camera on your selected devices.
Laptop Cart
If you are an instructor and would like to request access to a laptop cart, please use the following link: https://forms.office.com/r/jxwnQhWHGf
Unlocking the Laptop Cart
1. Input the combination. Numbers must line up in the middle of the lock (highlighted in red) as shown.
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from handle, Twist the handle clockwise.
Connect Your Own Device
You can connect your laptop or tablet using the HDMI cord provided at the instructor station. Once you have connected your device, select Laptop HDMI source option on the Crestron touch panel. If you need an adapter or are not sure if you can connect your device, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.