Please help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
The audio and projector settings, document cameras, and cameras where installed are controlled by a Crestron touch panel on or near the instructor's desk. If you are experiencing issues with the audio, projection, or control panel, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...
Document cameras are installed at the instructor station in most SET classrooms. The instructions below cover using the document camera to display content on the projection system. If you have any issues with the document camera or would like to request one for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...
Unlocking the Laptop Cart
1. Input the combination. As shown, numbers must line up in the middle of the lock (highlighted in red).
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from the handle. Twist the handle clockwise.
Rooms with laptop carts in SET:
Room | Number of Laptops |
SET109 | 30 |
SET160 | 24 |
SET160 (iPads) | 25 |
SET163 | 20 |
SET203 | 30 |
SET209 | 25 |
SET250 | 24 |
SET252 | 24 |
SET303 | 30 |
SET350 | 24 |
SET352 | 24 |
SET353 | 24 |
SET360 | 24 |
SET362 | 24 |
SET364 | 24 |
SET380 | 24 |
SET382 | 24 |
SET401 | 25 |
SET403 | 25 |
SET460 | 24 |
SET462 | 24 |
SET463 | 24 |
SET480 | 6 |
SET501 | 8 |
...
If you are experiencing issues with a classroom presentation remote or would like to request a remote for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request.
...
Webcams are available in the rooms listed below. Webcams can be used for a virtual meeting in software such as Zoom and Canvas. If you would like to request a webcam for your classroom, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request.
...
You can connect your laptop or tablet using the HDMI or VGA cord provided at the instructor station. Once you have connected your device, select either the VGA or HDMI source option on the Crestron touch panel. If you need an adapter or are unsure if you can connect your device, please contact get in touch with the Technology Service Center by calling (443) 518-4444 ext. three or using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...