Help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
USB ports are located on the front of the instructor computer and on the left side of the instructor station monitors.
Classroom
Classroom Equipment:
- Instructor computer with two monitors.
- Epson ceiling mounted projector
- Brightlinks whiteboard projector
- Document Camera
- Laptop Cart with 24 student laptops
AV Control System (Crestron)
...
- Select your source
- Select your destination
- Press 'Go'
Controlling Audio
...
1. Press Room Speakers to play sound from a selected source.
2. Check the volume in the computer and the video presented. In the Crestron Touch Screen, press Volume Up to increase the volume, and Volume Down to decrease the volume. To mute the speakers press Volume Mute.
Document Camera
...
- Power on the document camera using the power button on the front of the device.
- On the Crestron touch panel, select the document camera input option.
- Select which device or devices you would like to display your content on.
- Touch 'Go' to display content from the document camera on your selected devices.
Laptop Cart
If you are an instructor and would like to request access to a laptop cart, please use the following link: https://forms.office.com/r/jxwnQhWHGf
Unlocking the Laptop Cart
1. Input the combination. Numbers must line up in the middle of the lock (highlighted in red) as shown.
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from handle, Twist the handle clockwise.
Rooms with laptop carts in SET:
...
Room
...
Number of Laptops
...
SET109
...
30
...
SET160
...
24
...
SET160 (iPads)
...
25
...
SET163
...
20
...
SET203
...
30
...
SET209
...
25
...
SET250
...
24
...
SET252
...
24
...
SET303
...
30
...
SET350
...
24
...
SET352
...
24
...
SET353
...
24
...
SET360
...
24
...
SET362
...
24
...
SET364
...
24
...
SET380
...
24
...
SET382
...
24
...
SET401
...
25
...
SET403
...
25
...
SET460
...
24
...
...
24
...
SET463
...
24
...
SET480
...
6
...
SET501
...
8
Presentation Remote
Most SET classroom are equipped with Kensington presentation remotes to be used with PowerPoint presentations. The remote can navigate through PowerPoint presentation slides, control the computer mouse, and has a built in laser pointer.
...
If you are experiencing issues with a classroom presentation remote or would like to request a remote for your classroom, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request.
Wireless Microphone
...
- When using a lavaliere microphone, a good distance to place it from your mouth is one handbreadth from your chin, centered on top of your ribcage.
- To power the lavaliere microphone on, open up the beltpack by pushing the two plastic buttons on each side of the unit and opening the front panel. Gently push and hold the On/Off button until you see the Sennheiser logo.
- If the microphone does not turn on please check that the batteries are secure.
- To turn off the microphone, push and hold the On/Off button for two seconds. Please power the microphone off after use.
- If the microphone is on, but you are unable to hear your voice projected over the room speakers, please check the mute switch on the top of the unit to ensure the device is not muted.
Webcam
Webcams are available in the rooms listed below. Webcams can be used for virtual meeting in software such as Zoom and Canvas. If you would like to request a webcam for your classroom please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request.
...
Room
...
SET101
...
SET109
...
SET410
...
SET426
Connect Your Own Device
You can connect your laptop or tablet using the HDMI or VGA cord provided at the instructor station. Once you have connected your device, select either the VGA or HDMI source option on the Crestron touch panel. If you need an adapter or are not sure if you can connect your device, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
