Help us to improve our classroom instructions and documentation! Please email your feedback or suggestions of what you would like to see here to MWright@howardcc.edu.
...
USB ports are located on the front of the instructor computer and on the left side of the instructor station monitors. 
Classroom
This classroom has 12 student computers, 2 ceiling projectors, and 1 brighlinks projector located at the front whiteboard. 
AV Control System (Crestron)
...
Unlocking the Laptop Cart
1. Input the combination. Numbers must line up in the middle of the lock (highlighted in red) as shown.
2. Push up on the lock AND then pull back on the lock. You should hear a Click.
3. Remove the lock from handle, Twist the handle clockwise.
Rooms with laptop carts in SET:
Room | Number of Laptops |
SET109 | 30 |
SET160 | 24 |
SET160 (iPads) | 25 |
SET163 | 20 |
SET203 | 30 |
SET209 | 25 |
SET250 | 24 |
SET252 | 24 |
SET303 | 30 |
SET350 | 24 |
SET352 | 24 |
SET353 | 24 |
SET360 | 24 |
SET362 | 24 |
SET364 | 24 |
SET380 | 24 |
SET382 | 24 |
SET401 | 25 |
SET403 | 25 |
SET460 | 24 |
SET462 | 24 |
SET463 | 24 |
SET480 | 6 |
SET501 | 8 |
Presentation Remote
Most SET classroom are equipped with Kensington presentation remotes to be used with PowerPoint presentations. The remote can navigate through PowerPoint presentation slides, control the computer mouse, and has a built in laser pointer.
...
Webcams are available in the rooms listed below. Webcams can be used for virtual meeting in software such as Zoom and Canvas. If you would like to request a webcam for your classroom please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request.
Room |
SET101 |
SET109 |
SET410 |
SET426 |
Connect Your Own Device
You can connect your laptop or tablet using the HDMI or VGA cord provided at the instructor station. Once you have connected your device, select either the VGA or HDMI source option on the Crestron touch panel. If you need an adapter or are not sure if you can connect your device, please contact the Technology Service Center by calling (443) 518-4444 ext. 3, or by using this link to create a service request. Please indicate if you would like immediate assistance, and a technician will respond to the classroom to assist you.
...